Installing Windows 7 how to guide, I will show you how to install the Windows 7 OS. In our previous post How to configure the BIOS, we configured the BIOS to boot from CD/DVD-Drive. So we should be configured and ready to boot from the Windows 7 CD/DVD.
Adam H.
Occurs after you install a new video adapter or update to a poorly written video driver, this is commonly attributed to updates of the driver or adapter and sometimes is caused by driver file corruption. The following steps should help to resolve this Windows Blue Screen of Death stop error.
Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD
The system has attempted to read kernel data from virtual memory (the page file) and failed to find the data at the specified memory address. The potential source is a defective memory, a malfunctioning hard disk, an improperly configured disk controller or cable, corrupted data, or a virus infection.
Failed or defective physical memory including memory used in video adapters, but also corrupted hard disk’s and damaged motherboards cause DATA_BUS_ERROR
A problem occurred within the NTFS file-system driver. A similar Stop error, 0x23, exists for FAT32 drives on Windows Operation Systems.
Windows kernel detected an illegal or unknown processor instruction, often the result of invalid memory and access violations caused by faulty drivers or hardware devices. Often the error message lists the problematic Device or Driver which is very useful for the following steps.
This Blue Screen of Death stop error occurs if Windows is unable to access the volume containing the boot files. This is usually the result of a bad connection on the cables to the disk drive, a failing power supply, or disk corruption.
How to fix the Blue Screen of Death BAD_POOL_CALLER - A kernel-mode process or driver attempted to perform an illegal memory allocation. Can often occur
A hardware driver or system service requested data that was not in memory. It may be related to defective physical memory or incompatible software, especially remote control and antivirus programs.