PAGE FAULT – Microsoft Windows XP / Vista / 7 / 8 / 10

Stop Error – STOP 0x00000050 or PAGE_FAULT_IN_NONPAGED_AREA

Cause – A hardware driver or system service requested data that was not in memory. It may be related to defective physical memory or incompatible software, especially remote control and antivirus programs.

Resolution –

Step 1a – Boot into Safe Mode.

Step 2a – Remove the latest driver from Device Manager or software you previously installed. Then Reboot.


Step 3a – Disable any remote control and Uninstall your antivirus. Then Reboot.

Still having trouble??? Then Try the following.

Step 1b – Boot into Safe Mode.

Step 2b – Go to Control Panel > Windows Memory Diagnostic or type mdsched.exe into the Start Menu/Cortana search.

Step 3b – Boot and let Memory Diagnostic Run.

(For PCs with dual channel RAM or multiple sticks of RAM)

Step 1b – Shut your PC off, On Some PC’s the power supply will include an Analogue switch verify it is in the O for OFF Position before disconnecting power cable to the supply.

Disconnect the Power to your Power Supply.

Step 2b – Remove a single stick of RAM and Power On your PC.

(Note – If you have the same Stop Error shut your PC down and try replacing the next stick of RAM Repeat Sequence as needed.)

%d bloggers like this: